Stanza (CMPD) | PFTP Client = { |
| E.g. PFTP Client = { |
| Optional Reserved Stanza specifier. |
| Must be terminated with a matching “}” |
|
|
SubStanza | SYSLOG Facility = <value> |
| Values: DAEMON, LOCAL0 ... LOCAL7 |
| E.g. SYSLOG Facility = LOCAL2 |
| Optional SubStanza specifying the Syslog Facility for the MultiNode |
| Daemon |
|
|
SubStanza | Debug Value = <value> |
| Values: 0 – 3 |
| E.g. Debug Value = 1 |
| Optional SubStanza specifying the Level of Debugging for the Parallel |
| FTP Client. Larger number provides more information. |
|
|
SubStanza | Authentication Mechanism = <value> |
| Values: USER_PASS (Default), GSS, IDENT |
| E.g. Authentication Mechanism = GSS |
| Optional SubStanza specifying the preferred Client Authentication |
| mechanism. NOTE: this should be GSS if Kerberos Credentials are to |
| be used. |
|
|
SubStanza | Default COS = <value> |
| E.g. Default COS = 99 |
| Optional SubStanza specifying the default Class of Service if not |
| explicitly specified by the user. Use with caution – standard procedure |
| is to allow the Core Service to determine the optimal COS! |
|
|
SubStanza | Protocol = <value> |
| Values: PDATA_AND_MOVER (Default), PDATA_ONLY, |
| PDATA_PUSH |
| E.g. Protocol = PDATA_ONLY |
| Optional SubStanza specifying the default protocol. May contain any of |
| the three protocols supported. |
|
|
HPSS Installation Guide | July 2008 |
Release 6.2 (Revision 2.0) | 260 |
