IBM HPSS manual Hpss Installation Guide July Release 6.2 Revision 276

SubStanza	FTP Principal Keytab File = <value>
	Value: Pathname/Filename
	E.g. FTP Principal Keytab File = /var/hpss/etc/hpss.keytabs
	Optional SubStanza specifying the keytab containing the FTP principal.
SubStanza	Allow Passive Connections
	E.g. Allow Passive Connections
	Replaces -Aoption.
	Optional SubStanza enabling passive connections. Note: Not supported in
	the HPSS parallel FTP daemon for parallel operations. Client requests to
	use passive mode will be rejected.
SubStanza	Sleep for Debugger = <value>
	E.g. Sleep for Debugger = 5
	Replaces -zoption.
	Optional SubStanza specifying the number of seconds for the HPSS PFTP
	Daemon to sleep at initialization. Useful when attempting to attach to the
	daemon with the debugger. NOTE: leaving this active will cause
	significant degradation to the PFTP service!
SubStanza	Must Have Credentials
	E.g. Must Have Credentials
	Replaces -aoption.
	Optional SubStanza mandating authentication with Kerberos credentials,
	disabling{Username}/{Password} authentication. This also disables the
	user command.
SubStanza	Use Channel Bindings
	E.g. Use Channel Bindings
	Optional Kerberos allows for extra security by using channel bindings in
	credentials. This has been turned off; but can be reset by includion of this
	option.
SubStanza	Special Features Enabled
	E.g. Special Features Enabled
	Optional Substanza for Performance Testing ONLY. Should NOT be
	active except by appropriate personnel. Default is Off.
SubStanza	Allow CCC Command
	E.g. Allow CCC Command
	Optional Kerberos option not relevant to the HPSS PFTP Daemon.

HPSS Installation Guide	July 2008
Release 6.2 (Revision 2.0)	276