IBM HPSS manual Install and Configure Hpss Secondary Subsystem Machine

5.3.2. Install and Configure HPSS – Secondary Subsystem Machine

For the secondary subsystem machine, the following configuration steps must be performed:

•Pre-installation Configuration

•Install HPSS documentation and DB2

•Set up DB2 permanent license

•Install configuration bundle

•Configure Security Services

•Configure DB2

•Configure Other Services

The following sections describe the procedure to perform the above steps.

5.3.2.1. Pre-Installation Configuration

Before configuring HPSS, you will need to perform the following steps to setup the appropriate configuration directories and files on the machine where the secondary subsystem servers will run:

1.Install the HPSS software on the subsystem server node. For AIX, an LPP image or tar file will be provided in HPSS release 6.2.0. For Linux, an RPM package or tar file will be provided in HPSS release 6.2.0 Invoke the mkhpss utility from the /opt/hpss/bin (default location) directory. mkhpss will bring up the following screen:

2.From the "Secondary Subsystem Machine" submenu, click on the 'Pre-Install Config' icon in the left panel. mkhpss will display the following screen:

HPSS Installation Guide	July 2008
Release 6.2 (Revision 2.0)	160