scripts to verify/create the 'hpss' account and group, setup the /var/hpss (default location) directory with the required subdirectories and initialize the HPSS environment file, env.conf in /var/hpss/etc.
7.If the
##run command exited with status 0
Click the 'Done' button on the Command Output window to close the window.
5.3.1.2. Install HPSS Documentation and DB2 Software
This section describes the procedure to install HPSS documentation and DB2 software on the root subsystem machine.
From the "Root Subsystem Machine" submenu in the left panel, click on the "Install Software" option. The right panel will be displayed as shown:
This panel allows you to install DB2 software, HPSS software, and HPSS documentation. Perform the following steps to install the software:
1.To install DB2, check the 'Install DB2' checkbox. Click on the 'Source Path' button and select the directory that contains the DB2 filesets you wish to install.
The "Source Path" button will display the following screen to allow you to specify the desired directory:
HPSS Installation Guide | July 2008 |
Release 6.2 (Revision 2.0) | 141 |
