IBM HPSS manual Transfer Agent Stanza Description

;GSI = {

;Mapfile Specifier = LDAP:/var/hpss/etc/KRB2UnixMapfile

;Use Site Auth Method = CryptoCard

;Default Authorization Mechanism = LDAP

;}

;IDENT = {

;Mapfile Specifier = FILE:/var/hpss/etc/IDENT2UnixMapfile

;Use Site Auth Method = SecurId

;Default Authorization Mechanism = DBAS

;}

USER_PASS = {

;Use Site Auth Method = KRB5KDC

;Mapfile Specifier = FILE:/var/hpss/etc/Unix2UnixMapfile

Default Authorization Mechanism = UNIX

}

}

#Keytab Hostname Mapping Section

#Syntax:

#machinename Service Name = canonicalname

#"machinename" is the name returned by a call to gethostname()

#in the PFTP Daemon.

#"canonicalname" is the machine name associated with the Kerberos

#service - usually the fully qualified name as generated by the

#PFTP Client

#Specify "{machinename} Service Name" to set the service name to be

used

#for the PFTP Daemon machine when acquiring creds. This is needed

#when the servername; e.g., host/machinename@realm is different

#between the keytab file and the host/machinename obtained where

#the machinename is obtained by gethostname() (Non-HPSS PFTP Daemon)

#Specify nultiple "machinename Service Name" entries if this

#file is common to multiple PFTP Daemon servers.

;aixrahe.sandia.gov Service Name = aixrahe.sandia.gov

;sunrahe Service Name = sunrahe.sandia.gov

}

D.6. Transfer Agent Stanza

A large number of options are available for configuring the Transfer Agent and tuning its performance. The Transfer Agent is still under development and the following options are subject to change without prior notification.

Table 17. Transfer Agent Stanza Description

Configuration Type	Abbreviated Description
Stanza (CMPD)	Transfer Agent = {
	Reserved Stanza specifier.
	Must be terminated with a matching “}”

HPSS Installation Guide	July 2008
Release 6.2 (Revision 2.0)	287