IBM HPSS manual Hpss Installation Guide July Release 6.2 Revision 280

SubStanza	PortRange = <value>
	E.g. PortRange =
	ncadg_ip_udp[10100-12100]:ncacn_ip_tcp[10100-12100]
	Optional SubStanza specifying the port range to be used for the non-HPSS
	parallel FTP daemon which is necessary for parallel transfers. NOTE:
	This is ignored for passive listings, etc.
SubStanza	Socket Buffer Size = <value>
	Vlaues: Viable Socket Sizes
	E.g. Socket Buffer Size = 1MB
	Optional SubStanza specifying the socket buffer size. (non-HPSS PFTP
	daemon only.)
SubStanza	Set COS Based on Filesize
	Values: Pathname/filename
	E.g. Set COS Based on Filesize
	Optional SubStanza specifying to set the COS from the FileSize Options
	table. Default: Ignore the COS in the table.
SubStanza	FileSize Options = {
(Compound)	E.g. FileSize Options = {
	Optional SubStanza specifier.
	Must be terminated with a matching “}”
	See notes below.
Section	<value> = {
(Compound)	E.g. 1MB = {
	Optional Section specifier.
	Must be terminated with a matching “}”
	See notes below.
SubSection	BlockSize = <value>
	E.g. BlockSize = 512KB
	Optional SubSection specifying the size of data blocks to be used based on
	file size. (Has no meaning for the HPSS PFTP daemon.)
SubSection	StripeWidth = <value>
	E.g. StripeWidth = 0
	Optional SubSection specifying the stripe width to be used based on file
	size. 0 means use the Core Server Value (HPSS PFTP daemon) or use the
	default (Non-HPSS PFTP daemon).

HPSS Installation Guide	July 2008
Release 6.2 (Revision 2.0)	280