Item

Indicator, Button, or

Icon

Description

 

Connector

 

 

 

 

 

 

3

Power-on indicator,

 

The power-on indicator lights when the system

 

power button

 

power is on. The power button controls the power

 

 

 

supply output to the system.

 

 

 

NOTE: On ACPI-compliant operating systems,

 

 

 

turning off the system using the power button

 

 

 

causes the system to perform a graceful

 

 

 

shutdown before power to the system is

 

 

 

turned off.

4

NMI button

 

Used to troubleshoot software and device driver

 

 

 

errors when running certain operating systems.

 

 

 

This button can be pressed using the end of a

 

 

 

paper clip.

 

 

 

Use this button only if directed to do so by

 

 

 

qualified support personnel or by the operating

 

 

 

system documentation.

5

System identification

 

The identification buttons on the front and back

 

button

 

panels can be used to locate a particular system

 

 

 

within a rack. When one of these buttons is

 

 

 

pressed, the system status indicator on the back

 

 

 

flashes until one of the buttons is pressed again.

 

 

 

Press to toggle the system ID on and off.

 

 

 

If the system stops responding during POST, press

 

 

 

and hold the system ID button for more than five

 

 

 

seconds to enter BIOS progress mode.

 

 

 

To reset the iDRAC (if not disabled in F2 iDRAC

 

 

 

setup) press and hold the button for more than 15

 

 

 

seconds.

6

Mini USB connector/

 

Allows you to connect USB devices to the system

 

iDRAC Direct

 

or provides access to the iDRAC Direct features.

 

 

 

For more information, see the Integrated Dell

 

 

 

Remote Access Controller User's Guide at

 

 

 

dell.com/esmmanuals. The port is USB 3.0-

 

 

 

compliant.

7

Information tag

 

A slide-out label panel, which allows you to record

 

 

 

system information, such as Service Tag, NIC, and

 

 

 

MAC address as per your need.

8

Hard drives (10)

 

Up to ten 2.5 inch hot-swappable hard drives. Up

 

 

 

to six 2.5 hot-swappable hard drives and up to four

 

 

 

2.5 inch Dell PowerEdge Express Flash devices

 

 

 

(PCIe SSDs).

9

Quick Sync

 

Indicates a Quick Sync enabled system. The Quick

 

 

 

Sync feature is optional and requires a Quick Sync

11

Page 11
Image 11
Dell E26S Series owner manual