iDRAC Direct LED indicator codes
NOTE: The iDRAC Direct LED indicator does not light up for the USB mode.
Figure 6. iDRAC Direct LED indicator
1.iDRAC Direct status indicator
The table below displays iDRAC Direct activity when configuring iDRAC Direct by using the management port (USB XML Import).
Convention | iDRAC Direct | Condition |
| LED indicator |
|
| pattern |
|
|
|
|
A | Green | Lights green for a minimum of 2 seconds at the beginning and end |
|
| of a file transfer. |
B | Flashing green | Indicates file transfer or any operation tasks. |
C | Green and turns | Indicates that the file transfer is complete. |
| off |
|
D | Not lit | Indicates that the USB is ready to be removed or that a task is |
|
| complete. |
The table below displays iDRAC Direct activity when configuring iDRAC Direct using your laptop and cable (Laptop Connect).
iDRAC Direct LED | Condition |
indicator pattern |
|
|
|
Solid green for two | Indicates that the laptop is connected. |
seconds |
|
Flashing green (on | Indicates that the laptop connected is recognized. |
for two seconds and |
|
off for two seconds) |
|
18
