Convention | Power indicator | Condition |
| pattern |
|
|
|
|
|
| CAUTION: When correcting a PSU mismatch, replace only the |
|
| PSU with the flashing indicator. Swapping the PSU to make a |
|
| matched pair can result in an error condition and unexpected |
|
| system shutdown. To change from a High Output |
|
| configuration to a Low Output configuration or vice versa, |
|
| you must power down the system. |
|
| CAUTION: AC PSUs support both 220 V and 110 V input |
|
| voltages with the exception of Titanium PSUs, which support |
|
| only 220 V. When two identical PSUs receive different input |
|
| voltages, they can output different wattages, and trigger a |
|
| mismatch. |
|
| CAUTION: If two PSUs are used, they must be of the same type |
|
| and have the same maximum output power. |
|
| CAUTION: Combining AC and DC PSUs is not supported and |
|
| triggers a mismatch. |
E | Not lit | Power is not connected. |
Figure 12. DC PSU status indicator
1.DC PSU status indicator
25
