Dell E26S Series owner manual SD vFlash media card, Replacing a SD vFlash card

3.Lower the expansion-card riser into place until the expansion-card riser connector is fully seated in the connector.

Next steps

1.Follow the procedure listed in After working inside your system.

2.Install any device drivers required for the card as described in the documentation for the card.

SD vFlash media card

A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It provides persistent on-demand local storage and a custom deployment environment that allows automation of server configuration, scripts, and imaging. It emulates USB device(s). For more information, see the Integrated Dell Remote Access Controller User’s Guide at dell.com/esmmanuals.

Replacing a SD vFlash card

Prerequisites

NOTE: This procedure applies only to the 8-hard drive system.

Steps

1.Locate the vFlash media slot on the system.

2.To remove the installed SD vFlash card, push inward on the card to release it and pull the card from the card slot.

Figure 35. Removing and installing the SD vFlash card

1. SD vFlash card 2. SD vFlash card slot

3.To install the SD vFlash card, with the label side facing up, insert the contact-pin end of the SD card into the card slot on the module.

NOTE: The slot is keyed to ensure correct insertion of the card.

4.Press inward on the card to lock it into the slot.

88