Menu Item

Description

 

 

Logical Processor

Enables or disables the logical processors and displays the number of

 

logical processors. If the Logical Processor option is set to Enabled, the

 

BIOS displays all the logical processors. If this option is set to Disabled,

 

the BIOS displays only one logical processor per core. By default, the

 

Logical Processor option is set to Enabled.

Alternate RTID (Requestor

Enables you to allocate more RTIDs to the remote socket, thereby

Transaction ID) Setting

increasing cache performance between the sockets or easing work in

 

normal mode for NUMA. By default, the Alternate RTID (Requestor

 

Transaction ID) Setting is set to Disabled.

Virtualization Technology

Enables or disables the additional hardware capabilities provided for

 

virtualization. By default, the Virtualization Technology option is set to

 

Enabled.

Address Translation Service

Defines the Address Translation Cache (ATC) for devices to cache the

(ATS)

DMA transactions. This field provides an interface to a chipset's Address

 

Translation and Protection Table to translate DMA addresses to host

 

addresses. By default, the option is set to Enabled.

Adjacent Cache Line

Optimizes the system for applications that require high utilization of

Prefetch

sequential memory access. By default, the Adjacent Cache Line Prefetch

 

option is set to Enabled. You can disable this option for applications that

 

require high utilization of random memory access.

Hardware Prefetcher

Enables or disables the hardware prefetcher. By default, the Hardware

 

Prefetcher option is set to Enabled.

DCU Streamer Prefetcher

Allows you to enable or disable the Data Cache Unit (DCU) streamer

 

prefetcher. By default, the DCU Streamer Prefetcher option is set to

 

Enabled.

DCU IP Prefetcher

Enables or disables the Data Cache Unit (DCU) IP prefetcher. By default,

 

the DCU IP Prefetcher option is set to Enabled.

Execute Disable

Enables or disables the execute disable memory protection technology

 

feature. By default, the Execute Disable option is set to Enabled.

Logical Processor Idling

Enables or disables the operating system capability to put logical

 

processors in the idling state in order to reduce power consumption. By

 

default, the option is set to Disabled.

Configurable TDP

Allows reconfiguration of Thermal Design Power (TDP) to lower levels.

 

TDP refers to the maximum amount of power the cooling system is

 

required to dissipate.

X2Apic Mode

Enables or disables the X2Apic mode.

Dell Controlled Turbo

NOTE: Depending on the number of installed CPUs, there may be

 

 

up to four processor listings.

 

Controls the turbo engagement. Enable this option only when System

 

Profile is set to Performance.

Number of Cores per

Controls the number of enabled cores in each processor. By default, the

Processor

Number of Cores per Processor option is set to All.

Processor 64-bit Support

Specifies if the processor(s) support 64-bit extensions.

Processor Core Speed

Displays the maximum core frequency of the processor.

35

Page 35
Image 35
Dell E26S Series owner manual Ats