Figure 57. Removing and Installing the VGA Module |
|
| |
1. | screw | 2. | VGA module cable |
3. | VGA module | 4. | control panel |
Installing the VGA module
Prerequisites
NOTE: This procedure applies only to the
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Steps
1.Push the VGA module into the chassis and align the threaded screw hole on the VGA module with the screw hole on the chassis.
2.Using a #2 Philips screwdriver, replace the screw (at the bottom of the chassis) that secures the VGA module to the chassis.
3.Replace the control panel.
4.Connect the VGA module cable to the VGA module.
125
