CAUTION: Handle each memory module only by the card edges, making sure not to touch the middle of the memory module or metallic contacts.
2.If a memory module or a memory module blank is installed in the socket, remove it.
NOTE: Retain the removed memory module blank(s) for future use.
CAUTION: To prevent damage to the memory module or the
3.Align the edge connector of the memory module with the alignment key of the memory module socket, and insert the memory module in the socket.
NOTE: The memory module socket has an alignment key that allows you to install the memory module in the socket in only one orientation.
CAUTION: Do not apply pressure at the center of the memory module; apply pressure at both ends of the memory module evenly.
4.Press the memory module with your thumbs until the socket levers firmly click into place.
When the memory module is properly seated in the socket, the levers on the memory module socket align with the levers on the other sockets that have memory modules installed.
Figure 21. Installing the memory module
1. memory module | 2. alignment key |
3.memory module socket ejector (2)
Next steps
1.Install the cooling shroud.
2.Follow the procedure listed in After working inside your system.
3.Press <F2> to enter System Setup, and check the System Memory setting.
The system should have already changed the value to reflect the installed memory.
67
