Dell E26S Series owner manual Hard-drive backplane, Installing the system battery

Figure 47. Installing the system battery

1. system battery 2. positive side of the battery connector

Next steps

1.Install the cooling shroud.

2.Follow the procedure listed in After working inside your system.

3.While booting, press <F2> to enter the System Setup and ensure the battery is operating properly.

4.Enter the correct time and date in the System Setup Time and Date fields.

5.Exit the System Setup.

Hard-drive backplane

Depending on your configuration,

8–Hard-drive2.5 inch (x4) SAS/SATA backplane system

supports

10–Hard-drive2.5 inch (x10) SAS/SATA backplane that supports X10 and 4 (PCIe SSDs) + 6 system

supports

24–Hard-drive1.8 inch (x24) SAS/SATA backplane system

supports

111