Steps
Locate the SD card slot on the internal dual SD module or the backplane expander board and press inward on the card to release it from the slot and remove the card.
Next steps
Follow the procedure listed in After working inside your system.
Installing an internal SD card
Prerequisites
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: To use an SD card with your system, ensure that the internal SD card port is enabled in the System Setup.
Steps
1.Locate the SD card connector on the internal dual SD module or the backplane expander board. With the label side facing up, insert the
NOTE: The slot is keyed to ensure correct insertion of the card.
2.Press the card into the card slot to lock it into place.
Next steps
Follow the procedure listed in After working inside your system.
Integrated storage controller card
Your system includes a dedicated
Removing the integrated storage controller card
Prerequisites
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
3.Remove the cooling shroud.
4.Remove the
92
