Dell S2500 Using Windows Me with a USB or parallel cable, Insert the Drivers and Utilities CD

Using Windows Me with a USB or parallel cable

NOTE: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions.

If you attached a USB cable, you must install both a USB port driver and a custom print driver.

When you attached the cable and turned on the printer and computer, the Add New Hardware Wizard screen appeared on your computer screen.

1Insert the Drivers and Utilities CD.

The Wizard automatically searches for the USB driver on the CD and installs it.

NOTE: If you are using a parallel cable, skip to step 3.

2After the USB port driver is found, click Finish.

3Select Automatic search for the best driver (recommended), and then click Next. The wizard searches for a printer driver.

4Select your printer and driver from the list on the screen, and then click OK. Use the following table to identify the driver for your language.

If your computer	Select the driver from the list
uses this language
	(Replace the D:\ in the table with the letter of
	your CD-ROM drive)
English	D:\DRIVERS\WIN_9X\ENGLISH\LMPCL5C.INF
French	D:\DRIVERS\WIN_9X\FRENCH\LMPCL5C.INF
German	D:\DRIVERS\WIN_9X\GERMAN\LMPCL5C.INF
Italian	D:\DRIVERS\WIN_9X\ITALIAN\LMPCL5C.INF
Spanish	D:\DRIVERS\WIN_9X\SPANISH\LMPCL5C.INF

Setting up for local printing

49