
w w w . d e l l . c o m / s u p p l i e s s u p p o r t . d e l l . c o m
Attaching directly to the network (no queue)
Printer
Clients
If you are sharing your network printer in a small workgroup environment and are not using a server, use this method to attach your printer to the network. The
In this section you will:
•Attach cables.
•Print and check the network setup page.
•Assign an IP address to the printer.
•Verify the IP settings.
•Install printer drivers on each client that needs to print to the new printer.
Attach cables
1Make sure the printer is turned off and unplugged.
2Plug one end of a standard category 5 cable into a LAN drop or hub, and the other end into the Ethernet port (the top connector) on the back of the printer. The printer automatically adjusts for the network speed.
Ethernet port
60
Setting up for network printing