Dell S2500 owner manual Using Windows 98 with a USB or parallel cable

Using Windows 98 with a USB or parallel cable

NOTE: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions.

If you attached a USB cable, you must install both a USB port driver and a custom print driver.

When you attached the cable and turned on the printer and computer, the Add New Hardware Wizard screen appeared on your computer screen.

1Insert the Drivers and Utilities CD, and then click Next.

NOTE: If you are using a parallel cable, skip to step 7.

2Select Search for the best driver for your device (recommended), and then click Next.

3Select CD-ROM drive only, and then click Next.

4After the wizard finds the USB port driver, click Next.

5When the USB port driver is installed, click Finish. The wizard prompts you to search for new drivers.

6Click Next to search for a printer driver.

7Select Search for the best driver for your device (recommended), and then click Next.

8Select Specify a location only and browse to the location of the printer driver on the Drivers and Utilities CD.

Use the following table to identify the driver for your language.

If your computer	Select the driver from the list
uses this language
	(Replace the D:\ in the table with the letter of
	your CD-ROM drive)
English	D:\DRIVERS\WIN_9X\ENGLISH\LMPCL5C.INF
French	D:\DRIVERS\WIN_9X\FRENCH\LMPCL5C.INF
German	D:\DRIVERS\WIN_9X\GERMAN\LMPCL5C.INF
Italian	D:\DRIVERS\WIN_9X\ITALIAN\LMPCL5C.INF
Spanish	D:\DRIVERS\WIN_9X\SPANISH\LMPCL5C.INF

Setting up for local printing

51