Power on
Change the TV input to the input of this unit.

3Turn on power

1Turn on the TV and subwoofer power.

2

3 Press POWER ON to turn on power to the this unit.

The power indicator flashes green and the power turns on.

Power on

You can also switch the power

to standby by pressing ON/STANDBY on the main unit.

NOTE

Before you use the remote control unit for the first time, be sure to insert the batteries (vpage 124 “Inserting the batteries”).

1 2 3 4 5 4 Set up speakers

 

 

 

 

 

(Audyssey® Auto Setup)

1

2

3

4

5

 

The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey Auto Setup”.

To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six or more positions, as shown in the illustration (up to eight positions).

•When performing Audyssey Auto Setup, MultEQ® XT 32/Dynamic EQ®/Dynamic Volume® functions become active (vpage 89, 90).

•To set up the speakers manually, use “Speaker Setup” (vpage 93) on the menu.

NOTE

•Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows, silence cell phones, televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices as measurements may be affected by these sounds.

•Cell phones should be placed away from all audio electronics during the measurement process as Radio Frequency Interference (RFI) may cause measurement disruptions (even if the cell phone is not in use).

•Do not unplug the setup microphone from the main unit until Audyssey Auto Setup is completed.

•Do not stand between the speakers and setup microphone or allow obstacles in the path whilethe

measurements are being made. This will cause inaccurate readings.

• Loud test sounds may be played during Audyssey Auto setup. This is part of normal operation. If there is background noise in room, these test signals will increase in volume.

• Operating VOL dfduring the measurements will cancel the measurements.

• Measurement cannot be performed when headphones are connected.

7

version Simple

version Basic

version Advanced

Information