Denon AVR-4311CI Zone Setup

Setting items		Setting details
Rhapsody Account		Username / Password / Clear
Set or change Username		• For character input, see page 78.
and Password (vpage 46
“Listening to Rhapsody”).
Napster Account		Username / Password / Clear
Set or change Username		• For character input, see page 78.
and Password (vpage 42
“Listening to Napster”).
Network Info.		Friendly Name / DHCP / IP Address / MAC Address
Display network information.
	Zone Setup	Default settings are underlined.

Set the audio to play back with multi-zone (ZONE2, ZONE3).

Setting items		Setting details

	MANUAL SETUP

Setting items	Setting details

Volume Level	Variable : Volume adjustment is enabled by main unit and remote control
Set the volume output level. unit.
	–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
	amplifier.
	0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
	amplifier.
	When “Amp Assign” – “Assign Mode” (vpage 95) is set to
	“ZONE2”, “ZONE2/3” or “Z2/3-MONO”, the “Volume Level” setting
	is automatically set to “Variable”.
Volume Limit	OFF : Do not set a maximum volume.
Make a setting for	–20dB (61) / –10dB (71) / 0dB (81)
maximum volume.

•This can be set when the multi-zone “Volume Level” setting (vpage 103) is “Variable”.

•This is displayed from 0 to 99 when “Volume Display” (vpage 104) is set to “Absolute”.

version Simple

version Basic

Bass	–10dB – +10dB (0dB)
Adjust low frequency range
(bass).
Treble	–10dB – +10dB (0dB)
Adjust high frequency range
(treble).
HPF	ON : The low range is attenuated.
Make settings for cutting	OFF : The low range is not attenuated.

Power On Level

Define the volume setting that is active when the power is turned on.

Last : Use the memorized setting from the last session.

–– –dB (0) : Always mute when power is turned on.

–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.

•This can be set when the multi-zone “Volume Level” setting (vpage 103) is “Variable”.

•This is displayed from 0 to 99 when “Volume Display” (vpage 104) is set to “Absolute”.

version Advanced

	the low range to reduce
	distortion in the bass.
	Lch Level	–12dB – +12dB (0dB)
	Adjust the left channel	The “Lch Level” can be set when “Channel“ (vpage 103) is set to
	output level.
	output level.	“Stereo“.
		“Stereo“.
	Rch Level	–12dB – +12dB (0dB)
	Adjust the right channel	The “Rch Level” can be set when “Channel“ (vpage 103) is set to
	output level.
	output level.	“Stereo“.
		“Stereo“.
	Channel	Stereo : Select stereo output.
	Set the signal output from	Mono : Select mono output.
	multi-zone.	When “Amp Assign” – “Assign Mode” (vpage 95) is set to “Z2/3-

MONO”, the “Channel” setting is automatically set to “Mono”.

Mute Level	Full : The sound is muted entirely.
Set the amount of	–40dB : The sound is attenuated by 40 dB down.
attenuation when muting	–20dB : The sound is attenuated by 20 dB down.
is on.

Information