Setting items

Setting details

 

 

GUI

TUNER : Set the tuner screen display time when the input source is

(Continued)

“SIRIUS” or “HD Radio”.

 

• 30s : Show display for 30 seconds after operation.

 

• 10s : Show display for 10 seconds after operation.

 

• OFF : Turn display off.

 

• Always : Show display continuously.

Remote Preset Codes

See “Registering preset codes” (vpage 108).

Search a preset code to

 

register in the remote

 

control unit.

 

Quick Select Name

• Up to 16 characters can be input.

Change the “Quick Select”

• For character input, see page 78.

display title to one you

 

prefer.

 

Zone Rename

• Up to 10 characters can be input.

Change the display title of

• For character input, see page 78.

each zone to one you prefer.

 

Trigger Out 1 /

Trigger Out 1/2

Trigger Out 2

nn When setting for zone (MAIN ZONE / ZONE2 / ZONE3)

Select the condition for

Trigger out is activated through linkage to the power of the zone set

activating Trigger Out 1/2 for

to “ON”.

the input source, surround

nn When setting for input source

mode, etc.

Activate trigger out when the input source set to “ON” is selected.

See “TRIGGER OUT jacks”

 

(vpage 27) for more

Active for the zone set to “ON” with “When setting for zone”.

information on trigger out.

nn When setting for surround mode

Activate trigger out when the surround mode set to “ON” is selected.

Active when the “MAIN ZONE” set to “ON” with “When setting for zone” is selected, and when the input source set to “ON” with “When setting for input source” is selected.

nn When setting for HDMI monitor

Activate trigger out when the HDMI monitor set to “ON” is selected.

Activate trigger out when the HDMI monitor set to “ON” is selected. Active when the “MAIN ZONE” set to “ON” with “When setting for zone” is selected, and when the input source set to “ON” with “When setting for input source” is selected.

nn When setting for “Vertical Stretch”

Activatetriggeroutthroughlinkagewhen“VerticalStretch”(vpage98) is set to “ON”.

• ON : Activate trigger on this mode.

• – – – : Do not activate trigger on this mode.

MANUAL SETUP

Setting items

Setting details

 

 

 

Remote ID

1 / 2 / 3 / 4

 

Set when you operate

NOTE

 

another DENON AV

 

When changing the remote ID, also change the remote ID of main remote

amplifier with the remote

control unit of this unit.

control unit (RC-1145) at the same time. Also change the sub remote

Match the remote control

control unit (RC-1148) at the same time.

unit you are using with the

 

 

remote ID of this unit.

 

 

Dimmer

Bright : Normal display brightness.

 

Adjust the display

Dim : Reduced display brightness.

 

brightness of this unit.

Dark : Very low display brightness.

 

 

OFF : Turns the display off.

 

Setup Lock

ON : Turn protection on.

 

Protect settings from

OFF : Turn protection off.

 

inadvertent change.

When canceling the setting, set “Setup Lock” to “OFF”.

 

 

NOTE

 

 

When “Setup Lock” is set to “ON”, the settings listed below can no

 

longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt

 

to operate related settings.

 

 

• Menu operations

• Channel Level

 

• RESTORER

• MultEQ® XT 32

 

• Dolby Volume

• Dynamic EQ®

 

• Dynamic Volume®

 

Maintenance Mode

NOTE

 

Use when receiving

 

Only use this function if so instructed by a DENON serviceperson or

maintenance from a DENON

service engineer or custom

installer.

 

 

 

installer.

version Simple

version Basic

version Advanced

Information

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

105

buttons

(Up/Down/Left/Right)