Denon AVR-4311CI Connections, Converting input video signals for output (Video conversion function)

Connections

Simple

Important information

•Make connections as follows before using this unit. Select an appropriate connection type according to the components to be connected.

•You may need to make some settings on this unit depending on the connection method. Refer to each description for more information.

•Select the cables (sold separately) according to the components being connected.

NOTE

•Do not plug in the power cord until all connections have been completed.

•When making connections, also refer to the operating instructions of the other components being connected.

•Be sure to connect the left and right channels properly (left with left, right with right).

•Do not bundle power cords together with connection cables. Doing so can result in noise.

Converting input video signals for output (Video conversion function)

This unit is equipped with four types of video input connectors (HDMI, Component video, S-Video and video) and three types of video output connectors (HDMI, Component video and video).

Use the connectors corresponding to the components to be connected.

This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor.

	GFlow of video signals for ZONE2H
Video device		This unit	Monitor
			Monitor

	Input	Output
Output	(IN)	(MONITOR OUT)	Input
S-Video connector	S-Video connector
Video connector	Video connector	Video connector	Video connector

in Set as Necessary

•Set when not using the video conversion function. “Video Convert” (vpage 83)

•Set when changing the resolution of the video signal. “Resolution” (vpage 84)

version

version Basic

Advanced

	GFlow of video signals for MAIN ZONEH
Video device		This unit	Monitor
			Monitor

	Input	Output
Output	(IN)	(MONITOR OUT)	Input
HDMI connector	HDMI connector	HDMI	HDMI connector
		connector
Component video	Component video	Component video	Component video
connectors	connectors	connectors	connectors
S-Video connector	S-Video connector
Video connector	Video connector	Video connector	Video connector

: when 480i/576i signals are input

•The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats.

•The resolution of the video signal input to this unit’s HDMI connector is the one set at “Resolution” (vpage 84). (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the setting.)

•Resolutions of HDMI-compatible TVs can be checked at “HDMI Information” – “Monitor 1” or “Monitor 2” (vpage 107).

NOTE

•HDMI signals cannot be converted into analog signals.

•When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate.

•480p/576p/1080i/720p/1080p component video input signals cannot be converted into Video format.

version

Information