6.1-channel (Surround back speaker) connection

If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the SURR. BACK/AMP ASSIGN terminal.

For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” (vpage 55).

To perform 6.1-channel playback using the surround back speakers, select “Amp Assign” and set “Assign Mode” to “NORMAL” using steps 3 and 4 of “Set up “Amp Assign”” (vpage 63).

Also use the “Speaker Config.” setting (vpage 95) to set “Surround Back” to “1 spkr”.

FL SW

FR

 

C

SL

SR

SB

Connect

Front A/B connection

You can connect a second set of speakers to this unit and use them for playback.

To use a second set of speakers, select “Amp Assign” and set “Assign Mode” to “Front B” using steps 3 and 4 of “Set up “Amp Assign”” (vpage 63).

SW

FL(B) FL(A)

FR(A) FR(B)

zYou can also connect the Front B speakers to SURR.BACK/AMP ASSIGN or F.HEIGHT/AMP ASSIGN speaker terminals using the “Amp Assign” and “Assign Sp.” settings (vpage 95).

To perform multichannel playback, connect the center, surround, surround back, and front speakers, and subwoofer.

Front speakers can be used separately, depending on the speaker’s specifications or playback source such as front speakers (A) for multichannel playback and front speakers (B) for 2-channel playback (vpage 98 “Front Speaker Setup”).

version Simple

version Basic

version Advanced

Information

For speaker impedance and speaker cable connections, see page 5.

57