Setting items | Setting details |
|
|
Speaker Config. | Center : Set the presence and size of the center speaker. |
(Continued) | • Large : Use a large speaker that can adequately play back low |
| frequencies. |
| • Small : Use a small speaker that has inadequate playback capacity for |
| low frequencies. |
| • None : Select when a center speaker is not connected. |
| “Large” is not displayed when “Front” is set to “Small”. |
|
|
| Subwoofer : Set the presence of a subwoofer. |
| • 2 spkrs : Two subwoofers are used. |
| • 1 spkr : One subwoofer is used. |
| • None : Select when a subwoofer is not connected. |
| When “Front” is set to “Small”, “Subwoofer” is automatically set to |
| “1 spkr” or “2 spkrs”. |
| Surround : Set the presence and size of the surround speakers. |
| • Large : Use a large speaker that can adequately play back low |
| frequencies. |
| • Small : Use a small speaker that has inadequate playback capacity for |
| low frequencies. |
| • None : Select when the surround speakers are not connected. |
| • When “Surround” is set to “Large”, “Surround Back”, “Front Height” |
| and “Front Wide” can be set to “Large”. |
| • When “Surround” is set to “None”, “Surround Back”, “Front Height” |
| and “Front Wide” are automatically set to “None”. |
Surround Back : Set the presence, size and number of surround back speakers.
•Large : Use a large speaker that can adequately play back low frequencies.
•Small : Use a small speaker that has inadequate playback capacity for low frequencies.
•None : Select when the surround back speakers are not connected.
•2 spkrs : Use two surround back speakers.
•1 spkr : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel.
Even when the “Surround Back“ setting is other than “None”, sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make “Surround Parameters” – “Surround Back” setting other than “OFF” (vpage 87).
NOTE
“Surround Back” cannot be set when “Amp Assign” – “Assign Mode” (vpage 95) is set to “ZONE2/3” or when “Assign Sp.” is set to “S.BACK”.
| MANUAL SETUP |
|
|
Setting items | Setting details |
|
|
Speaker Config. | Front Height : Set the presence and size of the front height speakers. |
(Continued) | • Large : Use a large speaker that can adequately play back low |
| frequencies. |
| • Small : Use a small speaker that has inadequate playback capacity for |
| low frequencies. |
| • None : Select when the front height speakers are not connected. |
| NOTE |
| “Front Height” cannot be set when “Amp Assign” – “Assign Mode” |
| (vpage 95) is set to “ZONE2/3”, “2CH |
| set to “F.HEIGHT”. |
| Front Wide : Set the presence and size of the front wide speakers. |
| • Large : Use a large speaker that can adequately play back low |
| frequencies. |
| • Small : Use a small speaker that has inadequate playback capacity for |
| low frequencies. |
| • None : Select when the front wide speakers are not connected. |
| NOTE |
| “Front Wide” cannot be set when “Amp Assign” – “Assign Mode” |
| (vpage 95) is set to “ZONE2/3”, “2CH |
| set to “F.WIDE”. |
Bass Setting | Subwoofer Mode : Select low range signals to be reproduced by |
Set subwoofer and LFE | subwoofer. |
signal range playback. | • LFE : The low range signal of the channel set to “Small” speaker size is |
| added to the LFE signal output from the subwoofer. |
| • LFE+Main : The low range signal of all channels is added to the LFE |
| signal output from the subwoofer. |
• “Subwoofer Mode” can be set when “Speaker Config.” – “Subwoofer” (vpage 96) is set to “1 spkr” or “2 spkrs”.
• Play music or a movie source and select the mode offering the strongest bass.
• Select “LFE+Main” if you want the bass signals to always be produced from the subwoofer.
NOTE
If “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected surround mode.
LPF for LFE : Set LFE signal playback range.
•80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
96 | Remote control operation | Move the cursor | Confirm the setting | Return to previous menu |
| buttons | (Up/Down/Left/Right) | ||
|
|
|