Denon AVR-4311CI manual 103

Setting items	Setting details
2ch Direct/Stereo	SW Mode : Select low range signals to be reproduced by subwoofer.
(Continued)	• LFE : When the “2ch Direct/Stereo” – “Front” setting is set to “Large”,
	the LFE signal alone is output from the subwoofer. Also, when the “2ch
	Direct/Stereo” – “Front” setting is set to “Small”, the front channel low
	range signal is added to the LFE signal output from the subwoofer.
	• LFE+Main : The front channel low range signal is added to the LFE signal
	output from the subwoofer.
	This setting can be set made “2ch Direct/Stereo” – “Subwoofer” is
	set to “Yes”.
	Crossover : Set the maximum frequency of the bass signal output from
	each channel to the subwoofer.
	• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
	250Hz
	• This setting can be set made “2ch Direct/Stereo” – “Subwoofer” is set
	to “Yes”.
	• If the “2ch Direct/Stereo” – “Front” setting is “Large” and the
	“Subwoofer Mode” setting is “LFE”, “Full Band” is displayed and the
	setting cannot be made.
	Distance FL / Distance FR : Select the speaker.
	• 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to
	the speaker.
	Set the difference in the distance between the speakers to less than
	20 ft (6.0 m).
	Level FL / Level FR : Select the speaker.
	• –12.0dB – +12.0dB (0.0dB) : Adjust the level of each channel.
Auto Surround Mode	ON : Memorize settings. Automatically play with the last used surround
Make setting for	mode.
memorizing surround mode	OFF : Do not memorize settings. Surround mode does not change
setting for each input signal	according to input signal.
type.

• The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals r LPCM and DSD Multi-channel signals

• When playing in PURE DIRECT, the surround mode does not change even if the input signal is changed.

MANUAL SETUP

Setting items	Setting details
EQ Customize	Audyssey : Set when not using “Audyssey” equalizer.
Set so that unused equalizer	• Used : Use.
settings are not displayed	• Not Used : Do not use.

when MULTEQ is pressed.	Set so that “Audyssey” settings can be made when Audyssey® Auto
	Setup is performed.
	Audyssey Byp. L/R : Set when not using “Audyssey Byp. L/R” equalizer.
	• Used : Use.
	• Not Used : Do not use.
	Set so that “Audyssey Byp. L/R” settings can be made when
	Audyssey Auto Setup is performed.
The equalizer mode in which	Audyssey Flat : Set when not using “Audyssey Flat” equalizer.
	• Used : Use.
“Not Used” is selected	• Not Used : Do not use.
cannot be stored and
recalled in the Quick Select	Set so that “Audyssey Flat” settings can be made when Audyssey
function.	Auto Setup is performed.

Manual : Set when not using the “Manual” equalizer.

•Used : Use.

•Not Used : Do not use.

100	Remote control operation	Move the cursor	Confirm the setting	Return to previous menu
	buttons	(Up/Down/Left/Right)