Quick select function
It is also possible to save three settings for ZONE2 or ZONE3.
nnSaving the settings
1 Set the items below to the settings you want to save.
qInput source (vpage 73)
w Volume (vpage 73)
2 Press ZONE SELECT to switch the zone mode to Z2 (ZONE2) or Z3 (ZONE3).
3 In the zone mode for which you want to operate, press and hold the desired QUICK SELECT until “Memory” appears on the
The current settings will be memorized.
GQuick select defaultsH
| Input source | Volume |
Z2/Z3 QUICK SELECT 1 | BD | |
Z2/Z3 QUICK SELECT 2 | SAT/CBL | |
Z2/Z3 QUICK SELECT 3 | DOCK |
nnRecalling the settings
1 Press ZONE SELECT to switch the zone mode to Z2 (ZONE2) or Z3 (ZONE3).
2 Press QUICK SELECT at which the settings you want to call out are saved.
Sleep timer function
This is useful when you want to sleep while listening in ZONE2 or ZONE3.
1 Press ZONE SELECT to switch the zone mode to Z2 (ZONE2) or Z3 (ZONE3).
2 Press SLEEP and display the time you want to set.
The indicator on the display lights.
•The time switches as shown below each time SLEEP is pressed.
OFF 10 min 20 30 40 50
120 110 100 90 80 70 60
To confirm the countdown time before putting the unit to sleep
Press SLEEP.
“Z2 Sleep : zmin” or “Z3 Sleep : zmin” appears on the display. zz Countdown time
To cancel the sleep timer
Press SLEEP to set “OFF”.
The indicator on the display turns off.
The sleep timer is also canceled when this unit is set to the standby mode or the ZONE2 or ZONE3 power is turned off.
Naming quick select settings
See “Quick Select Name” (vpage 105).
74