Setting the display time length of the remote control unit display
Use the following procedure to set the length of time for which to display data such as zone and mode on the display panel of the remote control unit.
1 Press and hold POWER ON and ZONE/DEVICE ON for at least 3 seconds.
“SETUP” flashes twice on the remote control unit.
2 Use ui to display “LCD” on the remote control unit and press
ENTER.
3 Use ui to set the display time length and press ENTER.
“SET” flashes four times on the remote control unit and the normal operation mode is restored.
Remote control unit display | Display time |
05SEC | 5 sec |
10SEC | 10 sec |
15SEC | 15 sec |
30SEC | 30 sec |
The backlight of the remote control unit lights for 10 sec.
Operating the main remote control unit
Restoring all settings of the remote control unit to defaultUse the following procedure to restore all default settings of the remote control unit at the time of purchase.
1 Press and hold POWER ON and ZONE/DEVICE ON for at least 3 seconds.
“SETUP” flashes twice on the remote control unit.
2 Use ui to display “RESET” on the remote control unit and press
3 Use ui to display “ALL” on the remote control unit and press
4 Use ui to display “YES” on the remote control unit and press
ENTER.
“RESET” flashes four times on the remote control unit and the normal operation mode is restored.
Operating the sub remote control unit
•The sub remote control unit is equipped with frequently used buttons, so it can be used for simple remote control unit operations.
•The sub remote control unit can also be used for
•The operations listed below can be performed with the sub remote control unit.
•Switching the input source
•Adjusting the volume
•SIRIUS, HD Radio and iPod operations
•NET/USB direct play
•Menu operations
•Zone power on/off
•It is not possible to operate devices other than the amplifier.
NOTE
This unit cannot be used in the ZONE4 mode.
DIRECT PLAY button
•Playback is possible in the mode selected at menu “Direct Play”.
FAVORITES
Playback starts from the first track registered in the favorites.
ALL MUSIC
Playback starts from the first track registered in the “Music” folder.
•When USB is pressed, playback starts from the first track on the USB memory device.
NOTE
When the media server is stopped or restarted, it may no longer be possible to play tracks stored in the favorites.
version Simple
version Basic
version Advanced
Information
115