Denon AVR-4311CI Input Mode (Audio)

	Setting items					Setting details
Resolution						Auto : The number of pixels the TV connected to the HDMI output
Set the output resolution.						connector supports is detected automatically and the appropriate output
You can set “Resolution”						resolution is set.
separately for HDMI output						480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution.
of the analog video input
and HDMI input.						• This item can be set when “i/p Scaler” is set to anything other than
					z
BD		DVD		TV		“OFF”.
						• When “i/p Scaler” is set to ”Analog & HDMI”, the resolution of both the
SAT/CBL				DVR
						analog video input signal and HDMI input signal can be set.
	z
GAME			V.AUX	DOCK
						• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
NET/USB						signals.

•When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources (in 24 Hz). For video sources and mixed sources, we recommend setting the resolution to “1080p”.

•It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a resolution of 1080p/50Hz.

Progressive Mode						Auto : The video signal is automatically detected and the appropriate
Set an appropriate						mode is set.
progressive conversion						Video1 : Select mode suitable for video playback
mode for the source video						Video2 : Select mode suitable for video and 30-frame film material
signal.						playback.
					z	This item can be set when “i/p Scaler” is set to anything other than
BD		DVD		TV
						“OFF”.
SAT/CBL				DVR
	z
GAME			V.AUX	DOCK

	SOURCE SELECT
Input Mode (Audio)	Default settings are underlined.

The input modes available for selection may vary depending on the input source.

Setting items		Setting details
Input Mode	Auto : Automatically detect input signal and perform playback.
Set the audio input modes	HDMI : Play only signals from HDMI input.
for the different input	Digital : Play only signals from digital input.
sources.	Analog : Play only signals from analog input.
It is normally recommended	EXT. IN : Play only input signals from the external input terminal.
to set the audio input mode
to “Auto”.	• “HDMI” can be set for input sources for which “HDMI” is assigned at
	“Input Assign” (vpage 82).
	• “Digital” can be set for input sources for which “Digital” is assigned at
	“Input Assign” (vpage 82).
	• If the input source is set to “TV” or “Game”, it cannot be set to “Analog”.
	• When digital signals	are properly input, the	indicator lights on
	the display. If the	indicator does not light, check the digital input
	connector assignment and the connections.

•If “HDMI Control” is set to “ON” and a TV compatible with the ARC is connected via the HDMI MONITOR connectors, the input mode whose input source is “TV” is fixed to ARC.

•If the HDMI input or digital input terminals are not assigned when the input source is “TV” or “GAME”, “No Input” appears.

NOTE

The surround mode cannot be set if the input mode is set to “EXT. IN”.

Aspect

Set the aspect ratio for the video signals output to the HDMI.

BD DVD TV z

SAT/CBL DVR GAME z V.AUX DOCK

NET/USB

Full : Output at 16:9 aspect ratio.

Normal : Output at 4:3 aspect ratio.

“Aspect” can be set when “i/p Scaler” is set to anything other than “OFF”.

Decode Mode				Auto : Detect type of digital input signal and decode and play automatically.
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source.				DTS : Decode and play only DTS input signals.
	BD	DVD	TV	• This item can be set for input sources for which “HDMI” or “Digital” is
	SAT/CBL		DVR
				assigned at “Input Assign” (vpage 82).
	DOCK	GAME	V.AUX
				• Normally set this mode to “Auto”. Set “PCM” and “DTS” when
	CD			inputting the corresponding input signal.

zz “TV” or “GAME” can be set when “HDMI” (vpage 82) or “COMP” (vpage 83) has been assigned.

84	Remote control operation	Move the cursor	Confirm the setting	Return to previous menu
	buttons	(Up/Down/Left/Right)