Setting items | Setting details | |
|
| |
Amp Assign | [1] Assign Mode : Select the method for using a power amplifier in | |
Change the power | accordance with your speaker system. | |
amp assignment to suit | • NORMAL : Select the NORMAL setting to perform | |
the speaker system | ||
configuration. | ||
wide speakers. The surround back, front height, and front wide | ||
| ||
| speakers are automatically switched in accordance with the surround | |
| mode or input signals. | |
| • ZONE2 : Select the ZONE 2 setting to assign the unit’s | |
| amplifier for ZONE2 and output the audio in stereo. | |
| • ZONE2/3 : Select the ZONE 2/3 setting to assign the unit’s | |
| power amplifier for ZONE2 and ZONE3 and output the audio in stereo. | |
| • | |
| ||
| monaural. | |
| • | |
| the | |
| • 2CH : When you perform | |
| mode, select the 2CH setting to use the other front speakers for | |
| playback. | |
| • 2CH | |
| STEREO mode, select the 2CH | |
| speakers for | |
| • Front B : Select the Front B setting to use the second set of front | |
| speakers for playback. You can switch the front speakers A and B to be | |
| used for playback in accordance with the | |
| channel playback mode. When you select this Front B setting, also | |
| perform the “Front Speaker Setup” (vpage 98) procedure. | |
| • 11CH : Select the 11CH setting to perform playback using up to 11.2 | |
| channels using a combination of the unit’s | |
| ||
| • PRE AMP : Select the PRE AMP setting to use this unit as a preamplifier | |
| by connecting all speakers to an external power amplifier. You can | |
| perform up to | |
| mode, the | |
| interference to the preamplifier from the power amplifier is reduced. |
| MANUAL SETUP |
|
|
Setting items | Setting details |
|
|
Amp Assign | nn When you set “Assign Mode” to “ZONE2”, |
(Continued) |
[2]Assign Sp. : Select a speaker for audio output assigned by “Assign Mode”.
•S.BACK : Select the S.BACK setting to output the assigned audio from the surround back speakers.
•F.HEIGHT : Select the F.HEIGHT setting to output the assigned audio from the front height speakers.
•F.WIDE : Select the F.WIDE setting to output the assigned audio from the front wide speakers.
nn When you set “Assign Mode” to “11CH”, perform the following setting.
[3]Ext. Amp : Select the PRE OUT connector to which an external power amplifier is connected.
•Height : Select when you perform playback by connecting an external power amplifier to the front height channel of the PRE OUT connector.
•Front : Select when you perform playback by connecting an external power amplifier to the front channel of PRE OUT connector.
nn When you set “Assign Mode” to “PRE AMP”, perform the following setting.
[4]Assign Sp. : Set whether or not to use the speaker terminals for multizone.
•None : The speaker terminals of this unit are not used for multizone.
•ZONE2/3 : Use the speaker terminals of this unit for multizone. When ZONE2/3 is set, ZONE2 audio is output from the SURR.BACK/ AMP ASSIGN speaker terminals and ZONE3 audio is output from the F.WIDE/AMP ASSIGN speaker terminals.
Speaker Config. | Front : Set the front speaker size. |
Select speaker configuration | • Large : Use a large speaker that can adequately play back low |
and size (bass reproduction | frequencies. |
capability). | • Small : Use a small speaker that has inadequate playback capacity for |
NOTE | low frequencies. |
|
version Simple
version Basic
version Advanced
Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker. Instead, use the frequencies set in “Crossover Freq.” (vpage 98) as the standard for determining bass reproduction capability.
•When “Subwoofer” is set to “None”, “Front” is automatically set to “Large”.
•When “Front” is set to “Small”, “Center”, “Surround“, “Surround Back”, “Front Height” and “Front Wide” can not be set to “Large”.
Information
Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | 95 |
buttons | (Up/Down/Left/Right) |
| ||
|
|
|