Setting items | Setting details |
|
|
Firmware Update | Check for Update : Check for firmware updates. You can also check |
Update the firmware of the | approximately how long it will take to complete an update. |
receiver. | Start : Execute the update process. |
| When updating starts, the power indicator becomes red and the menu |
| screen is shut down. The amount of update time which has elapsed is |
| displayed. |
| When updating is complete, the power indicator becomes green and |
| normal status is resumed. |
•If updating fails, the set automatically retries, but if updating is still not possible, one of the messages shown below is displayed. If the display reads as shown below, check the settings and network environment, then update again.
| Display | Description |
| Updating fail | Updating failed. |
| Login failed | Failure to log into server. |
| Server is busy | Server is busy. Wait a while then try again. |
| Connection fail | Failure in connecting to server. |
| Download fail | Downloading of the firmware has failed. |
|
|
|
MANUAL SETUP
Notes concerning use of “Firmware Update” and “Add New Feature”
•In order to use these functions, you must have the correct system requirements and settings for a broadband Internet connection (vpage 26).
•Do not turn off the power until updating or upgrating is completed.
•Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/ upgrading procedure to be completed.
•Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/ upgrading is completed.
•Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc. set for this unit.
•The following backup data may be erased after an update or upgrade.
• Internet radio preset channel
• Internet radio Recently Played data
• Username registered for Flickr Contact
• Data in Internet radio, media server and USB memory device
• If the update or upgrade fails, press and hold the ON/STANDBY on the unit for more than 5 seconds, or remove and
Add New Feature Display new features that can be downloaded to this unit and perform an update.
Upgrade : Execute the upgrade process.
When updating starts, the power indicator becomes red and the menu screen is shut down. The amount of update time which has elapsed is displayed.
When upgrading is complete, the power indicator becomes green and normal status is resumed.
•If the upgrade is not successful, an error message identical to those in “Firmware Update” will appear on the display. Check the settings and network environment, then update again.
Upgrade Status : Display a list of the additional functions provided by the upgrade.
See the DENON website for details about updates.
When the procedure is complete, “Registered” is displayed in this menu and updates can be carried out. If the procedure has not been carried out, “Not Registered” is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding oand RETURN for
at least 3 seconds.
•Information regarding the “Firmware Update” function and “Add New Feature” will be announced on the DENON web site each time related plans are defined.
•When usable new firmware is released with “Firmware Update” or “Add New Feature”, a notification message is displayed on the menu screen. When you do not want to be notified, set “Update Notification” (vpage 102) and “Upgrade Notification” (vpage 102) to “OFF”.
| Language | Default settings are underlined. |
|
|
Set the language for display on the menu screen.
Setting details
English / Français
“Language” can also be set by the following procedure. However, the
menu screen is not displayed.
1. Press and hold the main unit’s AUDYSSEY DSX and RETURN for at least 3 seconds.
“Video Format” appears on the display.
2. Press ui and set “GUI Language”.
3. Press o p and set the language.
4.Press the main unit’s ENTER, MENU or RETURN to complete the
setting.
106 | Remote control operation | Move the cursor | Confirm the setting | Return to previous menu |
| buttons | (Up/Down/Left/Right) | ||
|
|
|