Switching the multi-zone input source to the same input source as used in the MAIN ZONE

This function is convenient for example when you want to listen to the same song as the one playing in the MAIN ZONE while in a different zone.

1 Press ZONE SELECT and set to

ZONE2 or ZONE3.

The currently selected multi-zone indicator illuminates.

2 Press M.ZONE CALL on the sub remote control unit.

The multi-zone input source switches to the MAIN ZONE’s input source.

NOTE

•This function cannot be used for the MAIN ZONE.

•When M.ZONE CALL is pressed while the multi-zone power is off, the multi-zone power turns on and the input source switches to the MAIN ZONE’s input source.

Setting the zone for which the sub remote control unit is used(Zone select lock mode)

We recommend always using the sub remote control unit for the same room. When this is done, the unit can be set so that the zone does not switch when buttons are operated.

Use the tip of a pen to press

 

1 ADVANCED SETUP.

ADVANCED SETUP

All the multi-zone indicators illuminate.

2 Select the multi-zone to be set. The selected multi-zone indicator illuminates.

q To set to “MAIN ZONE” Press REPEAT.

w To set to “ZONE2” Press RANDOM.

eTo set to “ZONE3”

Press USB.

rTo set to “ZONE4”

Press ALL MUSIC/FAVORITES.

3 Use the tip of a pen to press ADVANCED SETUP. The multi-zone indicator turns off.

nnTo cancel

1 Use the tip of a pen to press

ADVANCED SETUP.

The currently selected multi-zone indicator illuminates.

2 All the multi-zone indicator illuminates.

Press ZONE SELECT.

ADVANCED SETUP

3 Use the tip of a pen to press ADVANCED SETUP. The multi-zone indicator turns off.

Operating the sub remote control unit

Setting the remote ID

When using multiple DENON AV receivers in the same room, make this setting so that no AV receiver other than the desired one operates.

1 While pressing MENU, press ADVANCED SETUP with the tip of a pen.

The multi-zone indicator corresponding

 

to the currently selected remote ID

ADVANCED SETUP

flashes.

 

2 Select the remote ID to be set.

q To set to 1 Press REPEAT.

The “M” indicator flashes.

wTo set to 2

Press RANDOM.

The “Z2” indicator flashes.

e To set to 3 Press USB.

The “Z3” indicator flashes.

r To set to 4

Press ALL MUSIC/FAVORITES. The “Z4” indicator flashes.

3 While pressing MENU, press ADVANCED SETUP with the tip of a pen.

The multi-zone indicator turns off.

NOTE

When changing a setting, be sure to set the same remote ID as this unit’s (vpage 105).

Resetting the settings

While pressing ZONE OFF, press ADVANCED SETUP with the tip of a pen.

All the multi-zone indicators flash four times,

 

then all the settings are restored to their

ADVANCED SETUP

defaults.

 

118