Symptom | Cause/Solution | Page |
|
|
|
Audyssey DSX™ | • Check that “Speaker Config.” – “Front Height” or “Front Wide” is | 96 |
cannot be selected. | set to other than “None”. |
|
Or “Not Available” | • Check that “Speaker Config.” – “Center” is set to other than | 96 |
is displayed when | “None”. |
|
AUDYSSEY DSX | • Switch the surround mode to STANDARD. | 50 |
button is pressed. | • Check that “Input Mode” is set to other than “EXT.IN”. | 84 |
| • When headphones are used, Audyssey DSX cannot be selected. | – |
MultEQ® XT 32, | • Switch the surround mode to other than “DIRECT”or“PURE | 52 |
Dynamic EQ® and | DIRECT”. |
|
Dynamic Volume® | • Check that “Input Mode” is set to other than “EXT.IN”. | 84 |
cannot be selected. | • When headphones are used, MultEQ XT 32, Dynamic EQ and | – |
Or “Not Available” | Dynamic Volume cannot be selected. |
|
is displayed when |
|
|
MULTEQ button or |
|
|
DYN EQ/VOL button |
|
|
is pressed. |
|
|
Dynamic EQ and | • Make Audyssey Auto Setup. | 7, 63 |
Dynamic Volume |
|
|
cannot be selected. |
|
|
Or “Run Audyssey |
|
|
Auto Setup” is |
|
|
displayed when DYN |
|
|
EQ/VOL button is |
|
|
pressed. |
|
|
RESTORER cannot | • Check that an analog signal or PCM signal （fs=44.1/48kHz） is | 92 |
be selected. Or | input. For playback of multichannel signals such as Dolby Digital or |
|
“Not Available” is | DTS surround, RESTORER cannot be used. | 84 |
displayed when the | • Check that “Input Mode” is set to other than “EXT.IN”. | |
RESTORER button is |
|
|
pressed. |
|
|
GHDMIH
Symptom |
| Cause/Solution | Page |
No audio is |
| • Check the connection of the HDMI connectors. | 17 |
output with HDMI | • When outputting HDMI audio from the speakers, set “HDMI | 98 | |
connection. |
| Audio Out” on the menu to “AMP”. |
|
|
| • When outputting HDMI audio from a TV, set “HDMI Audio Out” | 98 |
|
| on the menu to “TV”. |
|
No video is |
| • Check the connection of the HDMI connectors. | 17 |
output with HDMI | • Set the input source to match the connected HDMI connector. | 17, 28 | |
connection. |
| • Check whether the TV is compatible with copyright protection | 16 |
|
| (HDCP). If connected to a device not compatible with HDCP, video |
|
|
| will not be output correctly. |
|
When the following | • Set “HDMI Control” on the menu to “OFF”. To operate power | 65, 99 | |
operations are |
| only for each device, set “Power Off Control” to “OFF”. |
|
performed on |
|
|
|
devices compatible |
|
| |
with HDMI control, |
|
| |
the same operations |
|
| |
occur on this unit. |
|
| |
• Power ON/OFF |
|
| |
• Switching | audio |
|
|
output devices |
|
| |
• Adjust volume |
|
|
|
• Switch input source |
|
| |
GSIRIUS Satellite RadioH |
| ||
Symptom |
| Cause/Solution | Page |
|
|
| |
“CHECK SIRIUS | • The SiriusConnect Home Tuner unit is not connected. Check that | 23 | |
TUNER” is displayed. | the connections are correct. |
| |
”ANTENNA ERROR” | • The antenna is not connected. Check that the connections are | 23 | |
is displayed. |
| correct. |
|
”NO SIGNAL” is | • The antenna is not connected. Check that the connections are | – | |
displayed. |
| correct. |
|
”INVALID |
| • Channel is not present. Select another channel. | – |
CHANNEL” is |
|
|
|
displayed. |
|
|
|
”ACQUIRING |
| • The signal cannot be received. Reposition your SiriusConnect | – |
SIGNAL” is |
| Home Tuner and Home Dock antenna. |
|
displayed. |
| • Displays while SiriusConnect Home Tuner is connected. Reposition | – |
|
| your SiriusConnect Home Tuner and Home Dock antenna. |
|
”Call SIRIUS”z is | • Channels are not subscribed to. If you subscribe to the channel, | – | |
displayed. |
| you can receive the channel. |
|
”SUBSCRIPTION | • While updating contract information. | – | |
UPDATED” is |
|
|
|
displayed. |
|
|
|
”Enter Lock Code | • Selected channels are locked. Please insert pass word (4 digits) | – | |
[ ]” is displayed. | into “[ ]” |
| |
zz After scroll displays “Call
136