Setting items

Setting details

 

 

HDMI Control

Control : Set the HDMI control function.

You can link operations with

• ON : Use HDMI control function.

devices connected to HDMI

• OFF : Do not use HDMI control function.

and compatible with HDMI

 

Control.

• When a device that is not compatible with the HDMI control function is

 

 

connected, set “HDMI Control” – “Control” to “OFF”.

 

• Please consult the operating instructions for each connected component

 

to check the settings.

 

• Refer to “HDMI control function” (vpage 65) for more information about

 

the HDMI control function.

NOTE

•When “HDMI Control” – “Control” is set to “ON”, it consumes more standby power. If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.

•“HDMI Control” does not work when the power to the equipment is off. Either turn power on or set to standby.

•The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.

•If the “HDMI Control” – “Control” settings have been changed, always reset the power to connected devices after the change.

Standby Source : Sets the HDMI input source to put into standby when the power is on.

•Last : This item is set at the last-used input source.

•HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 / HDMI7 : Put the respective input source into standby.

“Standby Source” can be set when “HDMI Control” – “Control” is set to “ON”.

Control Monitor : Set the HDMI MONITOR terminal to output the HDMI control signal.

•Monitor 1 : Output from the MONITOR 1 terminal.

•Monitor 2 : Output from the MONITOR 2 terminal.

•“Control Monitor” can be set when “HDMI Control” – “Control” is set to “ON”.

•ARC function works only with the terminal selected by “Control Monitor”.

 

 

MANUAL SETUP

 

 

 

Setting items

Setting details

 

 

 

HDMI Control

Power Off Control : Links the power standby of this unit to external

(Continued)

equipment.

 

 

• All : If power to a connected TV is turned off independently of the input

 

 

source, power to this unit is automatically set to standby.

 

 

• Video : If power to a connected TV is turned off when the input source

 

 

is BD / DVD / TV / SAT/CBL / DVR / GAME / V.AUX / DOCK, power to this

 

 

unit is automatically set to standby.

 

 

• OFF : This unit does not link with power to a TV.

 

 

“Power Off Control” can be set when “HDMI Control” – “Control” is

 

 

set to “ON”.

 

Audio Setup

Default settings are underlined.

 

 

Make settings for audio playback.

 

 

Setting items

Setting details

 

 

EXT. IN Setup

Subwoofer Level : Set playback level of subwoofer signal input from the

Setup playback method for

external input connector (EXT. IN).

analog signals inputted from

• +15dB : This is the recommended level.

external input connectors

• +10dB / +5dB / 0dB : Select the level according to the player being used.

(EXT. IN).

 

2ch Direct/Stereo

Setting : Select the method for setting the speakers used in the 2-channel

Select the method for

direct and stereo playback modes.

setting the speakers used

• Basic : The settings at “Speaker Setup” (vpage 93) are applied.

in the 2-channel direct and

• Custom : Make separate settings for 2-channel. Make the following

stereo playback modes.

settings:

Front : Set the front speaker size.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

If “Speaker Config.” – “Subwoofer” (vpage 96) is set to “None”, the setting is automatically set to “Large”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

If “Speaker Config.” – “Subwoofer” (vpage 96) is set to “None”, the setting is automatically set to “No”. If the “Front” setting is “Small”, the setting is automatically “Yes”.

version Simple

version Basic

version Advanced

Information

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

99

buttons

(Up/Down/Left/Right)