Press BD or DVD to switch an input source for a player used for playback.
The selected input source name appears on the remote control unit.
Play the component connected to this unit.
Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand.

Important information

Turning off the sound temporarily

Press MUTE.

• The power indicator flashes green.

• “MUTE” indicator on the display lights.

• appears on a TV screen.

•The sound is reduced to the level set at “Mute Level” (vpage 104).

•To cancel, press MUTE again. Muting can also be canceled by adjusting the master volume.

Playing a Blu-ray Disc player/DVD player

The following describes the procedure for playing Blu-ray Disc player/ DVD player.

1 Prepare for playback.

q Turn on the power of the TV, subwoofer and player.

w Change the TV input to the input of this unit.

e Load the disc in the player.

2 Press POWER ON to turn on power to the unit.

3

4

Playing a Blu-ray Disc player compatible with DENON LINK 4th

•DENON LINK 4th uses the clock of the AV amplifier connected by DENON LINK to achieve HDMI signal transfer with low jitter when playing BD.

•To play DENON LINK 4th signals, make HDMI and DENON LINK connections with a compatible Blu-ray disc player.

1Prepare for playback.

q Turn on the power of the TV,

subwoofer and player.

w Change the TV input to the input of this unit.

e Load the disc in the player.

2 Press POWER ON to turn on power to the unit.

3 Perform the settings of the “Input Assign” menu (vpage 82).

q Assign HDMI connectors for the input source (example: BD).

w Set “DIGITAL” to “D.LINK”.

4 Set“ON”.“HDMI Control” – “Control” (vpage 99) to

5 Press the input source select button (example: BD) to switch an input source assigned in step 3 - q.

The indicator lights on the display.

6 Set the audio input mode to “Auto” using the “Input Mode” menu (vpage 84).

• The default setting of “Input Mode” is “Auto”.

7 Play the component connected to this unit.

Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand.

NOTE

•Set the Blu-ray disc player’s “DENON LINK” setting to “4th”. For instructions on operation, refer to the Blu-ray disc player’s manual.

•The low jitter transmission function does not work except during Blu-ray disc playback. In this case, the video signal is output from the HDMI OUT terminal, and the audio signal from the DENON LINK terminal.

•When a Blu-ray disc is played with the input mode set to “Auto”, playback is performed in the DENON LINK 4th mode. When a disc other than a Blu-ray disc is played with the input mode set to “Auto”, playback is automatically performed in the DENON LINK 3rd mode.

•When the input mode is set to “HDMI”, normal HDMI playback is performed.

•When the input mode is set to “Digital”, playback is fixed to the DENON LINK 3rd mode and BDs cannot be played.

Playing Super Audio CD

1 Prepare for playback.

q Turn on the power of the TV, subwoofer and player.

w Load the disc in the player.

2 Press POWER ON to turn on power to the unit.

3 Perform the settings of the “Input Assign” menu (vpage 82).

Assign HDMI connectors for the input sources (example: DVD). Or set “DIGITAL” to “D.LINK”.

4 Press the input source select button (example: DVD) to switch an input source assigned in step 3.

The or indicator lights on the display.

5 Set the audio input mode to “Auto” using the “Input Mode” menu (vpage 84).

• The default setting of “Input Mode” is “Auto”.

6 Play the component connected to this unit.

The indicator lights on the display.

•When playing DSD signals in the DIRECT or PURE DIRECT mode, the DSD signals are converted into analog signals directly. When you play back an audio track using other surround modes or process downmix, at first convert DSD signals into the PCM format and then convert into analog signals.

•“DSD DIRECT” is shown on the display when playing DSD signals in the DIRECT mode.

29

version Simple

version Basic

version Advanced

Information