Press MENU to enter the setting. The on-screen display disappears.

Playback

1 Press ZONE SELECT to switch the zone mode to Z2 (ZONE2) or Z3 (ZONE3).

2 Press AMP.

3 Press ZONE/DEVICE ON to turn on the ZONE2 or ZONE3 power.

The or indicator on the display lights.

•Also press input source select button when in standby mode, the power turns on.

•When ZONE/DEVICE OFF is pressed, ZONE2 or ZONE3 turns off.

•Power in ZONE2 or ZONE3 can be turned on or off by pressing ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit.

Input source select buttons

Adjusting the volume

Use VOL df to adjust the volume.

GAdjustable rangeH – – – –80dB – –40dB – 18dB

(When the “Volume Display” (vpage 104) setting is “Relative”)

GAdjustable rangeH

0 – 41 – 99

(When the “Volume Display” (vpage 104) setting is “Absolute”)

•At time of purchase, “Volume Limit” (vpage 103) is set to “–10dB (71)”.

Turn MASTER VOLUME after pressing ZONE2/3 / REC SELECT on the main unit to adjust the sound volume.

Turning off the sound temporarily

Press MUTE.

The sound is reduced to the level set at “Mute Level” (vpage 103) in

Menu Operation

The settings related to tone adjustment and volume can be made.

1 In the zone mode for which you

want to operate, press MENU.

The ZONE2 or ZONE3 menu is displayed on the ZONE2 TV.

MENU ZONE2

INPUT :SAT/CBL

SIGNAL:ANALOG

VOL. :-40dB

>Bass

0dB

Treble

0dB

HPF

OFF

Lch Lev.

0dB

Rch Lev.

0dB

 

 

ZONE2

 

MENU

 

>Channel

STEREO

Vol.Lev.

- VAR -

Vol.Limit

-10dB

P.On Lev.

LAST

version Simple

version Basic

4 Press the input source select button.

The audio signal of the selected source is output to ZONE2 or ZONE3.

•Turn SOURCE SELECT after pressing ZONE2/3 / REC SELECT

on the main unit to select an input source.

the menu.

•To cancel, either adjust the volume or press MUTE again.

•The setting is canceled when the zone’s power is turned off.

Mute Lev.

FULL

2 Press uio p to select the menu to be set or operated.

3

version Advanced

When power for both MAIN ZONE and ZONE2 (ZONE3) is set to ON,

power of the MAIN ZONE only can be turned off. Select M (MAIN ZONE) in step 1 then press ZONE/DEVICE OFF.

•For ZONE2, the “Zone Setup” can be made while watching the on-screen display.

Also, when ZONE3 is operated, the on-screen display appears on the ZONE2 monitor, so operation can be performed watching this on-screen display.

•You can adjust these setting in “Zone Setup” (vpage 103) in the menu.

Information

73