Quick select function

All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same.

nnSaving the settings

1 Set the items below to the settings you want to save.

q Input source (vpage 28) w Volume (vpage 28)

e Surround Mode (vpage 50) r Video Select (vpage 83)

tAudyssey Setting

(MultEQ® XT 32, Dynamic EQ®,

Dynamic Volume®) (vpage 89)

2 Press and hold the desired QUICK SELECT until “Memory” appears on the display.

The current settings will be memorized.

GQuick select defaultsH

 

Input source

Volume

QUICK SELECT 1

BD

–40 dB

QUICK SELECT 2

SAT/CBL

–40 dB

QUICK SELECT 3

DOCK

–40 dB

nnRecalling the settings

Press QUICK SELECT at which the settings you want to call out are saved.

The , or indicator illuminates on the display.

Naming quick select settings

See “Quick Select Name” (vpage 105).

•The Quick Select function can be set separately for the different zones (vpage 74 “Quick select function”).

•If QUICK SELECT on the main unit

is pressed, the same function as with the remote control unit can be obtained.

NOTE

Input sources stored with the quick select function cannot be selected iftheyhavebeendeletedat“SourceDelete”(vpage104).Inthiscase, store them again.

REC OUT mode

When using the audio/video recording connectors (DVR outputs), you can record the audio or video from a different program source while listening to the currently played track.

1 Press ZONE2/3 / REC SELECT.

“ZONE2 SOURCE” is shown on the display.

2 Turn SOURCE SELECT until “RECOUT SOURCE” is displayed.

The indicator illuminates.

ZONE2 SOURCE ZONE2 PHONO ···· ZONE2 HD Radio

RECOUT HD Radio RECOUT SIRIUS ···· RECOUT SOURCE

3 Turn SOURCE SELECT to choose the input source to be recorded.

•For operating instructions, refer to the respective equipment’s operating instructions.

4 Start recording.

•For operating instructions, refer to the respective equipment’s operating instructions.

Convenient functions

•To cancel, press ZONE2/3 / REC SELECT, then turn SOURCE SELECT until “ZONE2 SOURCE” is displayed.

•Make a test recording before starting the actual recording.

•Signals are only output to the analog REC OUT connectors when the digital signals input to the digital input connectors (OPTICAL/ COAXIAL) are PCM (2-channel) signals.

•As the digital audio signal input from the HDMI or DENON LINK connector is not output to the digital recording connector (OPTICAL), you should connect using the OPTICAL and COAXIAL connectors.

•Sources selected with the REC OUT mode are output from ZONE2 as well.

•The operable buttons on the remote control unit in REC OUT mode while it is in the operating mode for ZONE2 are as follows:

•ZONE/DEVICE power button

•Muting button

•Master volume control button

•The “HD Radio” digital audio output signals are not output from the OPTICAL2 output connectors. Also, network audio signals (Internet radio, media server, USB, Napster, Rhapsody and Pandora) are output as copy-protected signals.

NOTE

•Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder.

•Input sources for which “Delete” is selected at “Source Delete” (vpage 104) cannot be selected.

67

version Simple

version Basic

version Advanced

Information