Eaton Electrical 9130 ÊRackmount Installation, Checking the Rail Kit Accessories, Tools Required

INSTALLATION

ÊRackmount Installation

The Eaton 9130 rackmount cabinet comes with all of the hardware required for installation in a standard EIA or JIS seismic rackmount configuration with square and round mounting holes. The rail assemblies adjust to mount in 48-cm (19-inch) racks with front to rear rail distances from 61 to 76 cm (24 to 30 inches) deep.

Checking the Rail Kit Accessories

Verify that the following rail kit items are included for each cabinet:

SLeft rail assembly:

-Left rail

-Rear rail

-(3) M4 8 pan-head screws

SRight rail assembly:

-Right rail

-Rear rail

-(3) M4 8 pan-head screws

SRail hardware kit:

-(10) M6 16 pan-head screws

-(10) M6 cage nuts

-(2) rear stop brackets

-(2) M3 8 pan-head screws

SMounting bracket kit:

-(2) mounting brackets

-(8) M4 8 flat-head screws

Tools Required

To assemble the components, the following tools may be needed:

SMedium flat-bladed screwdriver

SPhillips® #2 screwdriver

S7 and 8 mm wrench or socket

Eaton® 9130 UPS (700–3000 VA) User's Guide S 164201718 Rev 2 www.powerware.com 19