UPS MAINTENANCE
SDo not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes and may be extremely toxic.
SDetermine if the battery is inadvertently grounded. If inadvertently grounded, remove source from ground. Contact with any part of a grounded battery can result in electrical shock. The likelihood of such shock can be reduced if such grounds are removed during installation and maintenance (applicable to equipment and remote battery supplies not having a grounded supply circuit).
SELECTRIC ENERGY HAZARD. Do not attempt to alter any battery wiring or connectors. Attempting to alter wiring can cause injury.
SDisconnect charging source prior to connecting or disconnecting battery terminals.
Replacing Rackmount UPS Internal Batteries
C A U T I O N
The UPS internal batteries are heavy (see page 78). Use caution when handling the heavy batteries.
The internal batteries are located behind the UPS right front cover (behind the LCD control panel). The internal batteries are packaged together as one unit for easier handling.
To replace the batteries in the UPS:
1.Remove the UPS right front cover (see Figure 23).
To remove the cover, remove and retain the two screws on the right side of the cover. Grasp the top and bottom of the cover and slide the cover to the right.
NOTE A ribbon cable connects the LCD control panel to the UPS. Do not pull on the cable or disconnect it.
Eaton® 9130 UPS | 63 |
