Emerson 00809-0100-4102 manual Join device to network, Configure update rate

Section 2: Configuration	Reference Manual
May 2013	00809-0100-4102, Rev AA

2.4.2Join device to network

Fast Keys

2, 1, 3

In order to communicate with the Smart Wireless Gateway, and ultimately the Host System, the transmitter must be configured to communicate over the wireless network. This step is the wireless equivalent of connecting wires from a transmitter to the host system.

1.From the Home screen, select 2: Configure.

2.Select 1: Guided Setup.

3.Select 3: Join Device to Network.

Using a Field Communicator or AMS, enter the Network ID and Join Key so that they match the Network ID and Join Key of the Smart Wireless Gateway and other devices in the network. If the Network ID and Join Key are not identical to those set in the Gateway, the transmitter will not communicate with the network. The Network ID and Join Key may be obtained from the Smart Wireless Gateway on the Setup>Network>Settings page on the web server.

2.4.3Configure update rate

Fast Keys

2, 1, 4

The Update Rate is the frequency at which a new measurement is taken and transmitted over the wireless network. This by default is 1 minute. This may be changed at commissioning, or at any time via AMS Wireless Configurator. The Update Rate is user selectable from 1 second to 60 minutes.

1.From the Home screen, select 2: Configure.

2.Select 1: Guided Setup.

3.Select 4: Configure Update Rate.

12 Configuration