Reference Manual

Section 4: Commissioning

00809-0100-4102, Rev AA

May 2013

4.3Viewing network status

If the Rosemount 2051 Wireless was configured with the Network ID and Join Key and sufficient time for network polling has passed, the transmitter should be connected to the network. To verify connectivity, open the Smart Wireless Gateway’s integral web interface and navigate to the Explorer page.

This page will display the transmitter’s HART tag, PV, SV, TV, QV, and Update Rate. A green status indicator means that the device is working properly. A red indicator means that there is a problem with either the device or its communication path. For more detail on a specific device, click on the tag name.

4.4Verifying operation

Operation can be verified in four locations, at the device via the Local Display, using the Field Communicator, at the Smart Wireless Gateway’s integrated web interface, or by using AMS Suite Wireless Configurator or AMS Device Manager.

Local Display

The LCD will display the PV value at the same rate as the configured update rate. Press the Diagnostic button to display the TAG, Device ID, Network ID, Network Join Status and Device Status screens.

For Device Status screens, see “LCD Screen Messages” on page 73.

Commissioning

57

Page 69
Image 69
Emerson 00809-0100-4102 manual Viewing network status, Verifying operation, Local Display