Emerson 00809-0100-4102 manual Set range points

Reference Manual	Section 2: Configuration
00809-0100-4102, Rev AA	May 2013

1.Select Manual Setup and click on the HART tab.

2.Assign Primary, secondary, tertiary and quaternary variables under Variable Mapping.

3.Click Send.

4.Carefully read the warning and click Yes if it is safe to apply the changes.

2.6.3Set range points

From the HOME screen, enter the fast key sequence

Fast Keys 2, 1, 1, 5

The Range Values command sets the lower and upper range values used for the percent of range measurement.

Note

Transmitters are shipped from Rosemount Inc. fully calibrated per request or by the factory default of full scale (span = upper range limit).

1.From the Home screen, select 2: Configure

2.Select 1: Guided Setup

3.Select 1: Basic Setup

4.Select 5: Range Values

Configuration 19