Enterasys Networks 5G1XX, 5H1XX manual Configuring IP Trap Managers, Disabled

Assigning SNMP Parameters

6.4.2Configuring IP Trap Managers

The IP Trap Managers screen (Figure 6-9) is selected from the SNMP Configuration Menu screen. The table following the figure describes the fields. This screen is used to specify the management stations that will receive authentication failure messages or other trap messages from the switch.

Up to 5 trap managers may be entered.

Figure 6-9 IP Trap Managers Screen

	IP Address	Community Name	Status
1.	0.0.0.0	public	DISABLED
2.	0.0.0.0	public	DISABLED
3.	0.0.0.0	public	DISABLED
4.	0.0.0.0	public	DISABLED
5.	0.0.0.0	public	DISABLED
	<SAVE>	<RETURN>	<CANCEL>
			3583_17
Parameter		Description
IP Address		IP address of the trap manager.
Community Name		A community specified for trap management access.
Status		Sets administrative status of selected entry to ENABLED or
		DISABLED.

Management Setup Menu Screens 6-13