Configuring Bridge MIB Extensions
ParameterDescription
Extended Multicast Filtering | Indicates if the filtering of individual multicast addresses | |||||
Services | based on Multicast Registration Protocol is active. | |||||
|
|
|
|
|
| NOTE: This function is not available for the current |
|
|
|
|
|
| |
|
|
|
|
|
| firmware release. |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Traffic Classes | Indicates if the mapping of user priorities to multiple traffic | |||||
| classes function is active. (For configuration information, | |||||
| refer to Section 7.10.) | |||||
|
|
|
|
|
|
|
Static Entry Individual Port | Indicates if the static filtering for unicast and multicast | |||||
| addresses function is active. (For configuration information, | |||||
| refer to Section 7.16.) | |||||
|
|
|
|
|
|
|
Configurable PVID Tagging | Allows you to override the default PVID setting (Port | |||||
| VLAN ID used in frame tags) and its egress status | |||||
| ||||||
| to Section 7.15. | |||||
|
|
|
|
|
|
|
Local VLAN Capable | This switch does not support multiple local bridges (that is, | |||||
| multiple Spanning Trees). | |||||
|
|
|
|
|
|
|
VLAN Learning | Allows you to select the VLAN Learning mode (IVL or | |||||
| SVL) used by the switch. | |||||
|
| IVL (Independent VLAN Mode) – Allows addresses to | ||||
|
| be learned per VLAN. | ||||
|
| SVL (Shared VLAN Mode) – Allows a single address for | ||||
|
| all VLANs. | ||||
|
|
|
|
|
|
|
Auto VLAN Backplane | Enables or disables the ports on the backplane to support | |||||
Configuration | automatic configuration of VLANs. The default is Enabled. | |||||
| When set to Disabled, you must configure VLANs | |||||
| manually. For information on how to configure VLANs | |||||
| manually, refer to Section 7.15. | |||||
|
|
|
|
|
|
|
Host VLAN ID | Allows you to enter the Host VLAN ID and it is not limited | |||||
| to the default VLAN (1). | |||||
|
|
|
|
|
|
|
