Changing the Network Configuration

6.2.2IP Connectivity Test (Ping)

Use the IP Connectivity Test screen (Figure 6-4) to see if another site on the Internet can be reached. The screen parameters are described in the following table.

Figure 6-4 IP Connectivity Test Screen

IP Address:

0.0.0.0

 

 

Test Time

:

1

Interval

: 3

Success

:

0

Failure

: 0

[Start]

 

 

 

 

 

<RETURN>

 

3583_12

 

 

Parameter

Description

 

 

IP Address

IP address of the site that you want to ping.

 

 

Test Time

The number of ICMP echo requests to send to the specified

 

site. Range: 1~1000

 

 

Interval

The interval (in seconds) between pinging the specified site.

 

Range: 1~10 seconds

 

 

Success/Failure

The number of times the specified site has or has not

 

responded to pinging.

 

 

[Start] command

This field is used to initiate the ping. To ping an address,

 

highlight [Start] using the arrow keys, then press ENTER.

 

 

6-6Management Setup Menu Screens

Page 48
Image 48
Enterasys Networks 5H1XX, 5G1XX manual IP Connectivity Test Ping, IP Connectivity Test Screen