Enterasys Networks 5H1XX, 5G1XX manual SmartTrunking Configuration Screen

Configuring SmartTrunks

Use the Smart Trunking Configuration screen (Figure 7-11) to set up port trunks.

Figure 7-11 SmartTrunking Configuration Screen

SmartTrunking Configuration

SmartTrunk Group:

SmartTrunk Logical Port:

Port State

----------------------------

SmartTrunk Status: DISABLED

SmartTrunk Group Id:

Port:

<SAVE> <SHOW>

SmartTrunk Protocol: DISABLED

NO CHANGE

<RETURN> <CANCEL>

3583_31

Parameter	Description
SmartTrunk Group	Read only field that indicates the SmartTrunk Group
	number associated with the logical ports listed under
	SmartTrunk Logical Port.
SmartTrunk Logical Port	Read only field that lists the Logical Ports associated with
	the SmartTrunk Group
SmartTrunk Status	Used to enable or disable the trunk group
SmartTrunk Group ID	Used to select from 1 to 6 trunks. This is the group ID of the
	SmartTrunk group. Identifies the chip set to be used. Refer
	to Table 7-1for the ports associated with each group ID.
Port	Lists the valid ports for the chip set selected in the
	SmartTrunk Group ID field. Refer to Table 7-1for the ports
	associated with each group ID.

7-20Device Control Menu Screens