802.1Q VLAN Static Table Configuration
7-30 Device Control Menu Screens
7.14 802.1Q VLAN STATIC TABLE CONFIGURATION
Use the 802.1Q VLAN Static Table Configuration screen (Figure 7-19) to create a new VLAN or
modify the settings for an existing VLAN. You can add/delete port members of any VLAN in the
switch. (Also, note that all ports can only belong to one untagged VLAN. This is set to VLAN 1 by
default, but can be changed via the 802.1Q VLAN Port Configuration screen described in
Section7.15.)
Status Shows how this VLAN was added to the switch.
Current Egress Ports Shows the ports which have been added to the displayed
VLAN group, where “1” indicates that a port is a member
and “0” that it is not.
Current Untagged Ports If a port has been added to the displayed VLAN (shown
Current Egress Ports field), its entry in this field will be “1”
if the port is untagged or “0” if tagged.
[Show] Displays the members for the VLAN indicated by the
“Sorted by VID” field.
[More] Displays any subsequent VLANs if configured.
NOTE: Under the screen field heading of Egress Ports, Forbidden Egress Ports, or
Tagged Ports, each number (1 or 0) represents a port. For example, next to 1 - 24 under
the Ports field heading, the leftmost number represents the port 1 and th e rightmost
number represents port 24.
Parameter Description