Enterasys Networks 5H1XX, 5G1XX manual Configuring Igmp, Igmp Configuration Screen

Configuring IGMP

7.8CONFIGURING IGMP

This protocol allows a host to inform its local switch/router that it wants to receive transmissions addressed to a specific multicast group. Use the IGMP Configuration screen (Figure 7-12) to configure multicast filtering.

Figure 7-12 IGMP Configuration Screen

IGMP Status	:	DISABLED
IGMP Query Count	:	5
IGMP Report Delay (Minutes)	:	5

<SAVE> <RETURN> <CANCEL>

3583_32

NOTE: The default values are shown in Figure 7-12.

Parameter	Description
IGMP Status	If enabled, the switch will monitor network traffic to
	determine which hosts want to receive multicast traffic.

7-22Device Control Menu Screens