Configuring the Switch
Device Control Menu Screens 7-3
IGMP Configuration Configures IGMP multicast filtering. For details, refer to
Section 7.8.
Extended Bridge Configuration Displays/configures extended bridge capabilities provided
by this switch, including support for traffic classes, and
VLAN extensions. For details, refer to Section 7.9.
802.1P Configuration Used to configure the default port priorities and queue
assignments for each port, or to display the mapping for the
traffic classes. For details, refer to Section 7.10.
802.1Q VLAN Base Information Displays basic VLAN information, such as VLAN version
number and maximum VLANs supported. For details, refer
to Section7.11 and Sectio n 7.12.
802.1Q VLAN Current Table
Information
Displays VLAN groups and port members. For details,
refer to Section 7.13.
802.1Q VLAN Static Table
Configuration
Configures VLAN groups via static assignments, including
setting port members. For details, refer to Section7.14.
802.1Q VLAN Port
Configuration
Displays/configures port-specific VLAN settings, including
PVID, and ingress filtering. For details, refer to
Section 7.15.
Static Unicast Address Table
Configuration
Allows you to display or configure static unicast addresses.
For details, refer to Section 7.16.
Selection Description