Stylus C40UX/C40SX/C20UX/C20SX | Revision A |
4.2.8 Printhead unit removal
1.Remove the upper housing. (Section 4.2.1 Upper housing removal)
2.Remove the ink cartridges.
3.Move the carriage to the center.
4.Press on the driven pulley and loosen the timing belt, then remove the timing belt from the CR pinion gear.
Timing belt
Driven pulley | CR pinion gear |
|
Figure 4-26. Removing the Timing belt
5.Disconnect the FFC from the carriage unit.
FFC
Carriage unit
Figure 4-27. Disconnecting the FFC
6.Press on the left and right inside of the carriage unit, then pull the unit forward and remove the cover.
Carriage cover
Figure 4-28. Removing the Carriage cover
7.Lift the Printhead unit up and remove it.
Printhead unit
Figure 4-29. Removing the Printhead unit
Disassembly and Assembly | Disassembly | 71 |