Stylus C40UX/C40SX/C20UX/C20SX | Revision A |
5.1.2 Adjustment Program Initial Setting menu | 2. Select the Interface port number which you connect the printer to your PC. |
You have to input the following four items before entering the adjustment main menu.
Model name (Stylus C40UX/40SX/20UX/20SX)
For the Stylus C40UX, select Model name “Stylus C40UX.”
Interface setting (LPT1, LPT2, LPT3, EPUSB1, EPUSB2, EPUSB3)
1.When you run this program, the following menu appears. Select the model name in the screen below.
Figure 5-2. Interface Setting
Figure 5-1. Model Name Selection
NOTE: This printer stores model name in the PROM. Therefore, even you select the model name in the screen above, model name will not stored in the EEPROM. Selecting model name in the screen above determines respective special command for each model.
Adjustment | Overview | 77 |
